Sony bloggie MHS-CM5 - Manual (Page 47)

47
For details on the operation 1 page 44
C
u
st
om
iz
ing th
e
se
ttin
gs
Main Settings 2/2
The default settings are marked with .
Allows you to select the settings for the display method of images on the recording media set
in a connected equipment, such as a computer, when the camera is connected to a computer or
AV equipment with a USB connection.
b Note
• Be sure to set [LUN Settings] to [Multi], while uploading videos and still images to media services using
“PMB Portable”.
Sets the video signal output according to the TV color system of the connected video
equipment. Different countries and regions use different TV color systems. If you want to
view images on a TV screen, check page 53 for the TV color system of the country or region
where the camera is used.
LUN Settings
Multi Displays the images both on the memory card and in the
internal memory of the camera. Select this when you connect
the camera to a computer.
Single Displays only the images on the memory card when a
memory card is inserted, and displays the images in the
internal memory when a memory card is not inserted. Select
this when you connect the camera to equipment other than a
computer, and neither the images on the memory card nor the
images in the internal memory of the camera are displayed.
Video Out
NTSC Sets the video output signal to NTSC mode (e.g., for the
USA, Japan).
PAL Sets the video output signal to PAL mode (e.g., for Europe,
China).