Sony bloggie MHS-CM5 - Manual (Page 23)

23
B
a
si
c Op
er
ati
ons
Shooting images
Changing the screen display
When you tilt the multi-selector to v (DISP) repeatedly, the display changes as follows.
• Indicators on the screen disappear after about 5 seconds with the default settings in effect when you
purchased the camera. The default setting is set to AUTO. If you want to make indicators appear again,
carry out either of the following operations.
– Tilt the multi-selector to v (DISP).
– Carry out any operation other than those using the zoom lever. The indicators appear for only 5 seconds,
however.
• By tilting to v (DISP) longer, you can increase the brightness of the LCD backlight. Tilt to v (DISP)
longer again to return the brightness of the LCD backlight to normal.
• If you view images in bright outside light, adjust the brightness of the LCD backlight up.
However, the battery power may decrease faster under such condition.
• The LCD screen will not display while the camera is connected to a TV.
v (DISP) (Screen
display) button
OFF ON AUTO