Siemens MCM 1755 NTD - Manual (Page 9)

A26361-K472-Z100-2-5E19 English - 1
Introduction
Your new MCM 1755 NTD color monitor possesses a whole range of useful
features and functions, e. g.:
•
17" (40 cm) high-resolution CRT (0.28 mm dot pitch)
•
automatic scanning of all horizontal frequencies from 30 to 69 kHz and all
refresh rates (vertical frequencies) from 50 to 160 Hz
•
digital screen controller with microprocessor for storing 18 different display
modes
•
freely adjustable color alignment for matching the screen colors to the colors
of various input and output devices
•
VESA-DDC compatibility
•
power management for reducing power consumption by up to 95% when the
PC system is not in use
•
compliance with the latest ergonomic standards (ISO 9241-3)
•
compliance with the recommendations in accordance with TCO ’95
This Operating Manual contains important information you require to start up and
run your monitor.
The monitor interworks closely with the monitor controller (CRT controller, graphics
card) of your PC. It processes the data supplied to it by the monitor controller. The
monitor controller/the associated driver software is responsible for setting the
modes (resolution and refresh rate).
Target group
You don't need to be an "expert" to perform the operations described here. Do,
however, read the chapter with the important notes in the Operating Manual of
your PC and in this Operating Manual.
In case of difficulties please contact your local service point.
Further information
Details of how you set the resolution and refresh rate are provided in the
documentation on your monitor controller/the associated driver software.