Siemens MCM 1755 NTD - Manual (Page 21)

Color monitor MCM 1755 NTD
A26361-K472-Z100-2-5E19 English - 13
Ê Connect the other connector of the data cable to monitor port on the system
unit and secure the connector by tightening the safety screws.
Ê Plug the power cable supplied into the power connector (1) of the monitor.
Ê Plug the power cable into the monitor connector at the rear of the system unit.
Ê Plug in the system unit's power plug.
i
When you start working with your monitor for the first time you should
install the appropriate graphics drivers for your application software.
Details of how to do this are provided in the documentation on your
monitor controller/the associated driver software.