Siemens MCM 1755 NTD User Manual
Page 12
Color monitor MCM 1755 NTD
4 - English
A26361-K472-Z100-2-5E19
•
If you use a different data cable from the one supplied, ensure that it is
adequately shielded. CE conformance and optimum picture quality are
guaranteed only if you use the data cable supplied.
•
No data transmission cable should be connected or disconnected during a
thunderstorm.
•
Please ensure that no objects (e. g. necklaces, paperclips etc.) or liquids can
get into the interior of the monitor (electrical shock, short circuit).
•
In emergencies (e. g. damaged casing, elements or cables, penetration of
liquids or foreign matter), switch off the unit, disconnect the power plug and
contact your sales office or our customer service.
•
Only qualified technicians may repair the device. Unauthorized opening or
incorrect repair may greatly endanger the user (electric shock, fire risk).
•
Tampering with the device, in particular adjusting the high voltage or installing
a different type of CRT tube, may result in a large amount of X-ray radiation
being emitted. Devices modified in this way no longer comply with their license
and may not be used.
•
You may set only those resolutions and refresh rates specified in the
"
" chapter. Otherwise you may damage your monitor. If you are
in any doubt, contact your sales office or customer service.
•
When cleaning the monitor, observe the relevant notes in chapter "
the monitor
".
•
Keep this Operating Manual together with the device. If you pass on the
device to a third party, please also pass on the manual.