Siemens MCM 1755 NTD - Manual (Page 26)

Color monitor MCM 1755 NTD
18 - English A26361-K472-Z100-2-5E19
COLOR
TEMP.
Setting the color temperature
Press the Color temperature button once.
Use arrow button
or to select color temperature 6500 K or
9300 K.
Activating the factory settings
Factory settings are provided for picture size, picture position and edges in the
predefined operating modes.
Hold down the factory settings button for a few seconds until the
power lamp switches from orange to green. While this is happening
a color bar which extends to the right is displayed on the screen.
Degaussing the screen
If color distortions occur the screen must be degaussed.
Press the Degauss button briefly.
!
If you hold the button down for more than 5 seconds, all user-defined
settings are reset and will have to be entered again.