Siemens MCM 1755 NTD - Manual (Page 32)

Color monitor MCM 1755 NTD
24 - English A26361-K472-Z100-2-5E19
Preset operating modes
The monitor is preset to the following modes at the factory:
Horizontal frequency Refresh rate Resolution
31.5 kHz
±
0.5 kHz
31.5 kHz
±
0.5 kHz
43.3 kHz
±
0.5 kHz
37.8 kHz
±
0.5 kHz
50.6 kHz
±
0.5 kHz
53.7 kHz
±
0.5 kHz
63.0 kHz
±
0.5 kHz
68.7 kHz
±
0.5 kHz
60 Hz
±
2 Hz
70 Hz
±
2 Hz
85 Hz
±
2 Hz
84 Hz
±
2 Hz
100 Hz
±
2 Hz
85 Hz
±
2 Hz
100 Hz
±
2 Hz
85 Hz
±
2 Hz
640 x 480
720 x 400
640 x 480
720 x 400
640 x 480
800 x 600
800 x 600
1024 x 768
For ergonomic reasons we recommend a refresh rate of at least 75 Hz and a
maximum resolution of 1024 x 768 pixels.
i
The display position and size have been set to optimum values at the
factory for the operating modes listed above. Depending on the monitor
controller used, it may be necessary to change these settings. If you need
to do so, refer to the section entitled "Operation of the monitor" below.
Tilting and turning area
5˚
13˚
45˚
45˚
The specified tilting area refers to the zero position of the monitor foot marked with
an arrow.