Samsung SCC-ZM395N - Manual (Page 16)

Version 1.1
- 16 -
- WDR : If you set to , you will see
a menu where you can set the WDR options. specify the
shutter speed in WDR LEVEL, and the composition level in
. Select OUTDOOR, or INDOOR in BAL>. The WDR feature provides an extension of the gain
range, which is useful, especially if you work on pictures
both indoors and outdoors from inside of a building.
Namely, it improves the sharpness of the picture in outdoor
scenery as well as indoor.
◇ MANUAL
Adjust the iris level manually.
The overall brightness target of a camera will be set to ALC
level 0, while the iris can be adjusted manually.
● AGC(Auto Gain Control) / MOTION
With AGC active, if the signal strength falls below the
standard level, AGC will amplify the video signal to
automatically improve the sensitivity.
If is set to or mode, the
menu will switch to .
With the USER ( ) submenu selected, press [ENTER] to
display the corresponding screen. In this mode, you can select
from VERY LOW to VERY HIGH in 16 levels, enabling deeper,
wider choices to your convenience. With the FIX ( ) submenu
selected, press [ENTER] to display the corresponding screen.
In this mode, you can select an individualized mode in 16
levels, regardless of the brightness.
※ As long as the DAY/NIGHT menu is set to AUTO in
Camera Setup, the AGC menu is not available.
※ As long as FLICKERLESS is set to ON, the AGC mode
is not available.
※ If you set BACKLIGHT to WDR, the AGC fix mode is not
available.
※ If the DAY/NIGHT menu of the CAMERA SET is set to
AUTO, the AGC menu will be deactivated.
※ If FLICKERLESS is set to ON, the AGC FIX mode will
be disabled.
You can specify a level of AGC for controlling the camera motion. This is available only of
the SENSE UP menu is set to AUTO. Select F.FAST if you want to monitor a very fast
moving object in a low contrast scene, and S.SLOW if monitoring a very slow moving,
inanimate object in the same condition.
※ As long as DAY/NIGHT is set to , the menu is not available.