Spirit CU800 User Manual
Page 17
CR800_CU800
16
STEP 3: HANDLE BAR ASSEMBLY
1. Run the two hand pulse wires (26) into the hole in the handle bar mounting plate and out
through the hole in the console plate. Install the Handle Bar (3) onto the Console Mast (2) with
two 5/16 x 5/8 Hex Head bolts (51), two 5/16 Flat Washers (72) and two 8mm Split Washers
(103) being careful not to pinch the hand pulse wires.
This manual is related to the following products:
See also other documents in the category Spirit Sports and recreation:
- Esprit ET2 (28 pages)
- XT200 (12 pages)
- Z700 (7 pages)
- ZE501 (14 pages)
- XU875 (35 pages)
- EL1 (22 pages)
- Z8 (1 page)
- XT 800 (15 pages)
- ZE20 (15 pages)
- Z300 (22 pages)
- XT685 (38 pages)
- XT2751 (28 pages)
- CT 800 (25 pages)
- Z700 (28 pages)
- XE 125 (16 pages)
- XE 100 (45 pages)
- XT385 (32 pages)
- XT4851 (29 pages)
- XG400 (28 pages)
- Esprit ET10 (27 pages)
- Z900 (24 pages)
- XT101 (27 pages)
- XT375 (33 pages)
- XE150 (35 pages)
- IN300T (18 pages)
- XE395 (32 pages)
- XT600 (39 pages)
- EL 5 Elliptical (39 pages)
- XT485 (35 pages)
- XE700 (31 pages)
- XT285 (29 pages)
- 7300 (12 pages)
- XBR25 (34 pages)
- ZE40 (17 pages)
- XBR55 (30 pages)
- XE400 (29 pages)
- XT185 (27 pages)
- xt9 (19 pages)
- IN839 (16 pages)
- XE 850 (29 pages)
- XE295 (30 pages)
- XT475 (33 pages)
- EL255 (20 pages)