Spirit CU800 User Manual
Page 10
CR800_CU800
9
STEP 2: REAR HANDLEBARS
1. Install the rear handlebars (6) to the seat carriage (4). First install two 3/8 x 1-3/4 bolts (71)
through the top holes in the handlebars and fix with two 3/8 nuts (89) and flat washers (77)
from the bottom.
2. Install two 3/8 x 2-3/4 bolts (175) through the side holes in the handlebars and fix with two 3/8
nuts (89) and flat washers (77).
3. Connect the hand pulse wires (21, 27) to the mating connectors mounted in the left side cover
(35).
This manual is related to the following products:
See also other documents in the category Spirit Sports and recreation:
- Esprit ET2 (28 pages)
- XT200 (12 pages)
- ZE501 (14 pages)
- Z700 (7 pages)
- XU875 (35 pages)
- EL1 (22 pages)
- Z8 (1 page)
- XT 800 (15 pages)
- ZE20 (15 pages)
- Z300 (22 pages)
- XT685 (38 pages)
- XT2751 (28 pages)
- CT 800 (25 pages)
- Z700 (28 pages)
- XE 125 (16 pages)
- XE 100 (45 pages)
- XT4851 (29 pages)
- XT385 (32 pages)
- XG400 (28 pages)
- Esprit ET10 (27 pages)
- Z900 (24 pages)
- XT101 (27 pages)
- XT375 (33 pages)
- XE150 (35 pages)
- IN300T (18 pages)
- XE395 (32 pages)
- XT600 (39 pages)
- EL 5 Elliptical (39 pages)
- XT485 (35 pages)
- XE700 (31 pages)
- XT285 (29 pages)
- 7300 (12 pages)
- XBR25 (34 pages)
- ZE40 (17 pages)
- XBR55 (30 pages)
- XE400 (29 pages)
- XT185 (27 pages)
- xt9 (19 pages)
- IN839 (16 pages)
- XE 850 (29 pages)
- XE295 (30 pages)
- XT475 (33 pages)
- EL255 (20 pages)