Sony 3-286-590-12(1) - Manual (Page 81)

81
Cus
tom
iz
ing y
our c
a
m
co
rder
When the drop sensor has detected that the
camcorder has been dropped, your
camcorder may not allow you to record and
play back correctly to protect the internal
hard disk, as the default setting is [ON].
When dropping is detected,
appears.
b Notes
• Set the drop sensor to [ON] when you use the
camcorder. Otherwise, if you drop the
camcorder, you may damage the internal hard
disk.
• In a non-gravity situation, the drop sensor
activates. When you record images during an
activity such as roller-coasting or skydiving,
you can set [DROP SENSOR] to [OFF] (
)
so as not to activate the drop sensor.
The default setting is [ON], allowing you to
do the playback operation with the remote
commander of your TV by connecting your
camcorder to a “BRAVIA” Sync
compatible TV with the HDMI cable
(p. 45).
DROP SENSOR
CTRL FOR HDMI
(Control for HDMI)