Sony 3-286-590-12(1) - Manual (Page 80)

80
GENERAL SET
(Other setup items)
Touch 1, then 2.
If the item is not on the screen, touch
/
to change the page.
How to set
(HOME MENU) t page 66
(OPTION MENU) t page 82
The default settings are marked with B.
The default setting is [ON], allowing you to
view the demonstration in about 10
minutes, after you turn the POWER switch
to
(Movie).
z Tips
• The demonstration will be suspended in
situations such as those described below.
– When you press START/STOP or PHOTO
– When you touch the screen during the
demonstration (The demonstration starts
again after about 10 minutes)
– When you set the POWER switch to
(Still)
– When you press (HOME) or (VIEW
IMAGES)
The camera recording lamp on the front of
your camcorder lights up, as the default
setting is [ON].
See page 109.
DEMO MODE
REC LAMP (Recording
lamp)
CALIBRATION
B 5 min
The camcorder is automatically turned off
when you do not operate your camcorder
for more than approximately 5 minutes.
NEVER
The camcorder is not automatically turned
off.
b Notes
• When you connect your camcorder to a wall
outlet (wall socket), [A.SHUT OFF] is
automatically set to [NEVER].
You can set the time that you want the
camcorder to remain on before turning off
in sleep mode (p. 32). The default setting is
[10min].
b Notes
• [A.SHUT OFF] does not work during sleep
mode.
The default setting is [ON], allowing you to
use the supplied Remote Commander
(p. 116).
z Tips
• Set to [OFF] to prevent your camcorder from
responding to a command sent by another VCR
remote control unit.
A.SHUT OFF (Auto shut
off)
QUICK ON STBY (Quick
on standby)
REMOTE CTRL (Remote
control)