beautypg.com

Important hot tub owner information, Fcc notice – Sundance Spas Maxxus User Manual

Page 4

background image

Page 1

Important Hot Tub Owner Information

Your Sweetwater hot tub is constructed to the highest stan-
dards and is capable of providing many years of trouble-free
use . However, because heat retentive materials are utilized
to insulate the hot tub for efficient operation, an uncovered
hot tub surface directly exposed to sunlight and high tem-
peratures for an extended period is subject to permanent
damage . Damage caused by exposing the hot tub to this
abuse is not covered by warranty. We recommend that you
always keep the hot tub full of water when it is exposed to
direct sunlight and that you keep the Sweetwater insulating
cover in place at all times when the hot tub is not in use .
Read and carefully follow the requirements for your hot tub’s
support base (found in the section titled, “Locating Your
Sweetwater Hot Tub”, page 8).

Sweetwater Spas constantly strives to offer the finest hot
tub available, therefore modifications and enhancements
may be made which affect the specifications , illustrations
and/or instructions contained herein.

FCC Notice

This equipment has been tested and found to comply with the limits for
a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These lim-
its are designed to provide reasonable protection against harmful interfer-
ence in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accor-
dance with the instructions, may cause harmful interference to radio com-
munications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures: l) Rearrange
or relocate the receiving antenna. 2) Increase the separation between the
equipment and receiver. 3) Connect the equipment into an outlet on a cir-
cuit different from the circuit connected. 4) Consult the dealer or an expe-
rienced radio/TV technician for help. Changes or modifications not
expressly approved by the party responsible for FCC compliance could
void the user’s authority to operate this equipment.