Call setup, Hide id b, Call waiting b – Siemens CX75 User Manual

Page 84: Divert, Set up call divert (example)

Setup

ens AG 2003

, C

:\D

tl\Sieme

ns\D

TP-Sa

tz\Produkte\C

_Phoenix_1\outp

ut\FU

\CX75_

fug_

_050511_

vz_pk_d

ruck\PH

O_CallSetu

Temp

late:

X75,

Ve
rsion 2

; VAR

Language: en;

VAR

issu

e d

ate: 0
50224

right page (83)

of CX75 FUG en, A31008-H7420-A1-1-7619 (11.05.2005, 16:20)

Setup

Call setup

Select function.

Hide ID

When you make a call, your phone

number can be displayed on the re-

cipient's display (depending on the

service providers).
To suppress this display, you can en-

able the “Hide ID” mode for all subse-

quent calls or just for the next call.

You may need to register separately

with your service provider for these

functions.

Call waiting

If you are registered for this service,

you can check whether it is set and

you can activate/deactivate it.

Divert

You can specify the conditions under

which calls should be diverted to

your mailbox or other numbers.
Status check
You can check the current divert sta-

tus for all conditions. After a short

pause, the current situation is trans-

mitted by the network and

displayed.

Condition set.

Not set.

Display if status is un-

known (e.g. with a new

SIM card).

Clear all

All set diversions are cleared.

Set up call divert (example)

The most common condition for call

divert is, for example:
Unanswered

Select

Unanswered

. (In-

cludes the conditions

Not

reachable

No reply

Busy

see below)

Confirm.

Set

Select.

Confirm.

Select or enter the phone

number to which the calls

are to be diverted.

§Mailbox§

Use existing mail-

box phone numbers, or

enter them if necessary.

§OK§

Confirm. After a short

pause, the setting is con-

firmed by the network.