Sharp MD-M2H - Manual (Page 37)

36
■ Divide ■ Combine
1
Play the track which you want to divide into two,
and press the
0 6
button at the point where
you want to divide the track.
ST
2
Press the NAME/TOC EDIT button, and within
10 seconds, select “DIVIDE” pressing the
or button.
3
Within 10 seconds, press the ENTER button.
● To cancel the operation, press the ■ button.
4
Press the ENTER button again.
● The track is divided, and the unit is stopped at
the beginning of the second of the two tracks.
● The numbers of the tracks which come after the
divided track are automatically increased by one.
● When a track which has been given a name is
divided, the two new tracks will have the same
name. If the “TOC FULL
” message is seen,
the second track may not be given a name.
(Page 45)
Notes:
● This unit can hold up to 255 tracks. However, even
if the number of tracks assigned has not reached
255, it might not be possible to make any further
divisions of tracks. (Page 45)
● This function cannot be used in the random play
mode and APMS play mode.
3,4
H
1
2
2
(Remote control operation)
1
Whilst in the stop mode, select the second of
the two adjacent tracks you want to combine
pressing the
5 3
or
2 4
button.
Or start playing the second of the two tracks
you want to combine, and then press the
0 6
button.
2
Press the NAME/TOC EDIT button, and within
10 seconds, select “COMBINE” pressing the
or button.
3
Within 10 seconds, press the ENTER button.
● To cancel the operation, press the ■ button.
4
Press the ENTER button again.
● The two tracks are combined, and the unit is
stopped at the beginning of the combined track.
● The numbers assigned to the tracks following the
combined track are automatically decreased by
one.
When both tracks have a name:
● When only the first track has a name
→
That
name will be used.
● When only the second of the two tracks has a
name
→ That name will be used.
● When both tracks have a name → The name of
the first track will be used.
3,4
H
1
2
1
2
(Remote control operation)
(Continued)