Sharp MD-M2H - Manual (Page 15)

14
■ APMS (Automatic Programmable
Music Selector)
1
Select the desired programme source, CD or
MD, by pressing the CD or MD button.
2
Press the MEMORY button.
MEMORY MEMORY
REC
3
Press the
5 3
or
2 4
button.
TRACK
MEMORY
REC
Selected track number
TRACK
4
Press the ENTER button.
MEMORY
TOTAL
Playback order
TOTAL
5
Repeat steps 3 and 4 for any other tracks up to
20 tracks (P-20) can be programmed.
6
Press the ■ button.
MEMORY
TOTAL
Total playing time Total number of tracks
MEMORY
7
Press the
0 6
button to start playback of the
programmed selections.
● After all of the programmed tracks have finished
playback, the unit will automatically stop.
(Continued)
3
CLEAR
1
2
6
7
4
(Remote control operation)
To clear the programmed selections:
Press the CLEAR button whilst the “MEMORY”
indicator is flashing.
● Each time the button is pressed, one track will
be cleared, beginning with the last track pro-
grammed.
To cancel the APMS:
Whilst the unit is stopped in the APMS mode, press
the CLEAR button to turn off the “MEMORY” dis-
play.
● The programme contents will be erased.
● When you open the CD compartment or a
MiniDisc is ejected, the APMS mode will be can-
celled.
To check which tracks are programmed:
Whilst the unit is stopped in the APMS mode, press
the
5 3
or
2 4
button.
Playback order Track number
Adding tracks to the programme
If a programme has been previously stored, the
“MEMORY” indicator will be displayed. Then
follow steps 2 - 6 to add additional tracks, the new
tracks will be stored after the last track of the origi-
nal programme.
Notes:
● It is not possible to insert an additional track
between programmed tracks that have already
been entered.
● Programming and canceling are not possible
during playback or in the pause mode.