English _ 27, Basic setup, And button – Samsung SSA-S2000 User Manual
Page 27: Provide the alarm output port and press, Buttons and press
English _ 27
BASIC SETUP
TO SPECIFY THE ALARM OUTPUT PORT FOR THE DISMANTLED DEVICE
Specify the alarm type for the dismantled device. The alarm rings from the dismantlement of the device to the
authentication of the Master Card or a registered card.
Present the Master Card to the device.
Press Button
8
and Button
4
in sequence and press
ENT
.
Provide the alarm output port and press
ENT
The default is set to “02” (alarm).
For the alarm output port settings, refer to the output port table on page 29.
The alarm for the dismantled device occurs regardless of the operation mode
of either Normal or Secure so you simply specify the operation port only. (To
specify the operation port, refer to the operation port settings in the output
port setting table on page 29.)
TO OPEN OR CLOSE THE ENTRY DOOR
Follow the step below If you want to keep the door open regardless of the authentication
process using the Master Card or PIN.
Present the Master Card to the device.
Press Button
4
and Button
1
in sequence and press
ENT
.
To release opening the door, repeat Step 1 above, select the
<
4
2
> buttons and press
ENT
.
1.
2.
3.
•
•
1.
2.
•
X
Y
Z
[
\
]
^
_
`
lzj
lu{
W
i
zzhTzYWWW
tGj
X
Y
Z
[
\
]
^
_
`
lzj
lu{
W
i
zzhTzYWWW
X
Y
Z
[
\
]
^
_
`
lzj
lu{
W
i
zzhTzYWWW
tGj
X
Y
Z
[
\
]
^
_
`
lzj
lu{
W
i
zzhTzYWWW