Recalls - cont’d – Siemens Hicom 118 User Manual
Page 12
12
Recalls - Cont’d
WHAT YOU HAVE TO DO
WHAT HAPPENS
You now have 3 options:
1. Re-extend to same extension
2. Extend to a new extension
3. Caller will call again.
1. Depress Ext No key
Call re-extended to same extension
Depress RELEASE key
14:34 thu. 26 jun. 97.
>
2. Depress new Ext No key
Call extended to new extension
Depress RELEASE key
14:34 thu. 26 jun. 97.
>
3. Release call
Caller will call again
Depress RELEASE key
14:34 thu. 26 jun. 97.
>
Call now disconnected.
If no Ext No key is available you can
return to extended call by depressing
the PICKUP key and dialling the relevant
extension number.
You don’t have to wait for the call to
recall to you.
See also other documents in the category Siemens Phones:
- HIPATH 5000
- Gigaset S450IP
- HIPATH 40
- 300 Series
- GIGASET A58H
- 420 S
- 70isdn
- HIPATH 1190
- optiPoint 400
- HIPATH 3000
- Giga 3000
- CX253isdn
- HiPath 5000 RSM
- Hicom 300 H
- HIPATH 2000
- C450 IP
- HIPATH 8000
- OPENSTAGE 60
- HIPATH 8000
- HiPath 4000
- HiPath 4000
- HiPath 4000
- OPENSTAGE 20 2000
- 300 H
- OptiPoint 410
- 300Series
- Gigaset M49AM
- HIPATH 8000 OPTIPOINT420
- Gigaset S450
- A30853
- OPTIPOINT 500
- OPTIPOINT 500
- Gigaset S45
- 5000 RSM
- HIPATH V1.2.33
- 3035isdn
- optiPoint family
- GigasetS44
- 2010
- Gigaset DE380 IP R
- Gigaset C450IP
- 30ISDN
- HICOM 300
- C450
- HIPATH 1200
- OPTIPOINT HIPATH 5000
- SOFTPHONE OC130S
- HiPath Xpressions Unified Messaging