Siemens Giga 3000 - Manual (Page 9)

9
Giga 3000 Comfort, IM1-engl, A31008-G3000-B002-3-6Z19 3000co.fm 05.01.00
Registering the handset
You can change the display language (see page 21). After
doing this, switch your handset off and then on again.
You must register a new handset at the base station before
you can make any telephone calls. When you switch on your
handset, the message
5HJLVWHU" * appears.
Step 1:
• You must first prepare the Siemens base station:
Step 2:
• Now enter the following in the handset within one
minute:
<(6 Press the display key.
Enter base PIN
Ц2.Ц
Enter the base station’s system PIN (fac-
tory setting: 0000) and confirm – unas-
signed internal numbers are displayed.
e.g. s Enter the required call number – the base
name, e.g.
%DVH, is displayed (no
longer flashing).
Your handset is now ready for use!
* English is the default factory setting
Gigaset Preparing the base station
3010/pocket
3015 Press the coloured key on the base station
for approx. 10 seconds until you hear the
signal tones.
3020, 3025
3030, 3035 In the base station menu select registration
option and confirm.
ISDN
models Press the LED – flashes during registration.
1000/2000
models See above for appropriate successor models
in the 3000 range, e.g. 3010 for 2010.
– To register at multiple base stations or to change base
names, see page 23.
– To modify the internal call number: re-register your hand-
set at the same base, see page 23.