Samsung VP-D23i EN - Manual (Page 41)

Advanced Recording
41 41
ENGLISH
● DEMONSTRATION
✤ Demonstration automatically shows you the major functions that are
included with your camcorder so that you may use them more easily.
✤ The DEMONSTRATION function may only be used in the
CAMERA mode without a tape inserted in the camcorder.
✤ The demonstration operates repeatedly until the DEMONSTRATION
mode switched OFF.
1. Set the camcorder to CAMERA mode.
2. Press the MENU button.
■ The menu list will appear.
3. Turn the MENU DIAL to highlight INITIAL.
4. Select DEMONSTRATION from the submenu and press
the ENTER button.
5. To activate the DEMONSTRATION,
set DEMONSTRATION ON.
■ Press the menu button to quit the menu.
■ The demonstration will begin.
6. To end the DEMONSTRATION,
set the DEMONSTRATION to OFF.
Reference
■ The DEMONSTRATION function only works without a TAPE installed.
■ The DEMONSTRATION mode is automatically activated when the
camcorder is left idle for more than 10 minutes after switching to the
CAMERA mode (no tape is inserted in the camcorder).
■ If you press other buttons (FADE, BLC, PHOTO, EASY) during the
DEMONSTRATION mode, the DEMONSTRATION stops temporarily
and resumes 10 minutes later if you do not operate any other functions.
■ While setting the NIGHT CAPTURE to ON, the DEMONSTRATION
function does not work.
CAM MODE
INITIAL CLOCK SET
WL. REMOTE
BEEP SOUND
SHUT. SOUND
DEMO
CAMERA
A/V
MEMORY
VIEWER
CAM MODE
INITIAL SET
CLOCK SET
SHUTTER SOUND
BEEP SOUND
WL.REMOTE
DEMONSTRATION
● DEMOSTATION
✤
✤ DEMOSTATION CAMERA
✤ DEMOSTATION
OFF
1. CAMERA
2. MENU
■
3. MENU DIAL
INITIAL
4. DEMOSTATION
ENTER
5. DEMOSTATION
DEMOSTATION ON
■ MENU
■
6. DEMOSTATION
DEMOSTATION OFF
■ DEMOSTATION
■ CAMERA
10 DEMOSTATION
■ DEMOSTATION FADE
BLC PHOTO EASY
DEMOSTATION 10
DEMOSTATION
■ NIGHT CAPTURE ON
DEMONSTRATION