beautypg.com

Troubleshooting 68 – SMC Networks Barricade SMC2804WBR38 User Manual

Page 78

background image

Troubleshooting

68

3. Then type ipconfig/renew.

D. The 10/100 LED does not light after a connection is made.

1. Check that the host computer and hub are both powered on.

2. Be sure the network cable is connected to both devices.

3. Verify that Category 5 cable is used if you are operating at

100 Mbps, and that the length of any cable does not exceed
100 m (328 ft).

4. Check the network card connections.

5. The 10BASE-T/100BASE-TX hub/switch port, network card,

or cable may be defective.

See also other documents in the category SMC Networks Hardware: