SMC Networks Barricade SMC2804WBR38 - Manual (Page 32)

Configuring Client TCP/IP
22
3. the Local Area Connection Properties box, verify the box next
to Internet Protocol (TCP/IP) is checked. Then highlight the
Internet Protocol (TCP/IP), and click the Properties button.
4. Select “Obtain an IP address automatically” to configure your
computer for DHCP. Click the OK button to save this change
and close the Properties window.
5. Click the OK button again to save these new changes.
6. Reboot your PC.
Configuring a Macintosh Computer
You may find that the instructions here do not exactly match your
screen. This is because these steps and screenshots were
created using Mac OS 8.5. Mac OS 7.x and above are all very
similar, but may not be identical to Mac OS 8.5.
1. Pull down the Apple Menu. Click Control Panel and select
TCP/IP.
2. In the TCP/IP
dialog box,
make sure that
Ethernet is
selected in the
Connect Via:
field.
3. Select Using
DHCP Server
in the Configure
field.
4. Close the TCP/IP dialog box.