Siemens IP-Module CFVA-IP - Manual (Page 20)

Configuring network settings
10 Configuring network settings
1. Call up the device homepage. See section 9.1: Calling up the device homepage.
2. Select Network settings in the Configuration menu.
The Network settings dialogue window opens:
Fig. 4 Network settings
3. Enter the desired settings in this dialogue window.
4. The settings are described in detail below.
5. Click on Save.
6. Restart your IP-Module. See section 14: Restarting the IP Module.
The network settings will be adopted.
Firmware Version Display of the Firmware Version
Hostname The hostname entered here appears in the Web Cam IP Manager as
the name of the device. See section 9.1.2: Calling up the device
homepage using the Web-Cam IP Manager.
Automatic network
configuration (DHCP) If you activate automatic network configuration, a DHCP or BOOTP
server will automatically allocate an IP address, a subnet mask and a
gateway to your device. See section 9.1.1: Changing the device IP
address via the device homepage.
IP-Address Enter the device IP address in this box. See section 9.1.1: Changing
the device IP address via the device homepage.
Subnet mask Enter the device subnet mask in this box. See section 9.1.1: Changing
the device IP address via the device homepage.
20
Siemens Building Technologies
Fire Safety & Security Products