Sharp SCL901 - Manual (Page 68)

ENGLISH
64
Troubleshooting
Troubleshooting
✤ Before contacting a service center, perform the following simple checks. They might save you the time and expense of an unneces-
sary call.
Self Diagnosis Display
Display Blinking Inform that... Action
slow
the battery pack is
Change it to a charged one.
almost discharged
fast
the battery pack is Change it to a
fully discharged. charged battery.
TAPE END! slow
the tape has almost
Prepare a new one.
reached its end.
TAPE END! no the tape reached its end Change to a new one.
TAPE! slow
there is no tape in
Insert a tape.
the camcorder.
PROTECTION! slow
the tape is protected If you want to record,
from recording. release the protection tab.
D.EMG slow the camcorder has 1. Eject the tape.
C.EMG some mechanical fault. 2. Set to OFF
R.EMG 3. Detach the battery.
L.EMG 4. Reattach the battery.
* Please contact your
local service center if
the problem continues.
slow
moisture condensation has see page 67.
formed in the camcorder.
00732M SCL901 SEA (46-71) 12/26/03 10:46 AM Page 64