Sharp SCL901 - Manual (Page 45)

Advanced Recording
ENGLISH
41
Selecting and recording DSE effects
1. Set the power switch to CAMERA mode. (see page 18)
2. Press the DSE button, STROBE or SEPIA will be displayed.
3. Keep pressing the DSE button, until the desired mode is displayed.
4. Press the START/STOP button to start recording.
5. To exit the DSE functions, press the DSE button once or several times until no DSE
mode is displayed on the LCD.
Notes: ■ It is recommended that you set the DSE mode in STBY mode.
■ DSE functions will not operate in EASY mode.
STBY
X:XX:XX
SEPIA
00732M SCL901 SEA (20-45) 12/26/03 10:45 AM Page 41