Sharp SCL901 - Manual (Page 51)

ENGLISH
47
Snap Shot (SCL906/L907 only)
✤ With the SNAP SHOT feature, your camcorder functions like a regular film camera, allowing you to take single still pictures.
-
The SNAP SHOT function operates in the CAMERA mode.
1. Set the power switch to CAMERA mode.
2. Point the Camera at the image you want to record and press the SNAP SHOT button.
■ At this time, be careful not to shake your camcorder because the image will be
blurred.
3. After the SNAP SHOT button has been pressed, your camcorder will record the still
image for 6 seconds, then automatically return to STANDBY mode.
■ You can check the remaining time for SNAP SHOT recording by
looking at the time displayed on the screen.
■ To stop SNAP SHOT recording, press the SNAP SHOT button again.
Notes:
■ The SNAP SHOT is activated during shooting.
■ The still image will be displayed on the display if the SNAP SHOT button is pressed in CAMERA mode.
Advanced Recording
CAMERA
SNAP SHOT
SNAP SHOT
00732M SCL901 SEA (46-71) 12/26/03 10:46 AM Page 47