Basic recording – Sharp SCL901 User Manual

Page 33

ENGLISH

Basic Recording

Adjusting the LCD during PLAY

The LCD adjustment method in PLAYER mode is identical to step
number 4 of page 26, except the power switch must be set to PLAYER.

Controlling the Sound from the Speaker

✤

When you use the LCD Screen while playing back, you can hear sound
from the Speaker.

✤

Volume of the Speaker is controlled by the UP/DOWN dial tab on the
camcorder.

✤

If you close the LCD Screen, the LCD Screen and Speaker are turned off.

✤

If the speaker does not work properly, check the following:

■

Is the LCD Screen closed?

■

Is the volume adjusted to a low level?

■

Is the speaker off? (see page 56)

Notes:

■

Lower the volume if vibration from the built-in speaker causes screen
disturbance.

■

Volume display will automatically disappear 2 seconds after adjusting.

Viewing a Still Picture

■

Press (PLAY/STILL)

button

during playback.

■

To resume playback, press the

(PLAY/STILL) button again.

Picture Search

■

Keep pressing

(FF) or

(REW) button during playback.

■

To resume normal playback, release the button.

PLAY/STILL

REW

00732M SCL901 SEA (20-45) 12/26/03 10:45 AM Page 29