Sharp SCL901 - Manual (Page 59)

ENGLISH
55
Various Functions in PLAYER mode
Playing back a Tape
To view a STILL picture (Playback pause)
- Press (PLAY/STILL) button during playback.
- To resume playback, press (PLAY/STILL) button again.
Note: Your camcorder will automatically stop if it is left for more than 5 minutes in STILL mode
without operation in order to prevent tape and head-drum wear.
To locate a scene (picture search)
- Press (FF) or (REW) buttons during playback. To resume normal
playback, release the buttons.
Zero RETURN (SCL906/L907 only)
✤ The ZERO RETURN function works in PLAYER STOP mode.
✤ You can Fast Forward or Rewind to 0:00:00 automatically.
1. Set the power switch to PLAYER mode.
■ Make sure that STOP is displayed.
2. Press the ZERO RETURN button.
■ Z.RTN is displayed.
■ FF or REW works automatically.
Notes:
■ The ZERO RETURN button does not work when the TAPE COUNTER reads 0:00:00.
■ Set the COUNTER RESET to “C.RESET 0:00:00” in MENU mode at the start of the cassette or the required sequence.
When you wish to find this point on the tape again, press Z.RETURN button when playback is stopped.
START/ STOP
SELF TIMER ZERO RETURN STILL
COUNTER RESET WIDE
TELE
DISPLAY
PLAY/STILL
REW FF
00732M SCL901 SEA (46-71) 12/26/03 10:46 AM Page 55