Troubleshooting – Sony PBD-V30 User Manual
Page 66
66
There is no picture.
mCheck that the player is connected
securely.
mThe video connecting cable is
damaged. Replace it with a new
one.
mMake sure you connect the player to
the video input connector on the TV
(page 11).
mMake sure you turn on the TV.
mMake sure you select the video
input on the TV so that you can
view the pictures from the player.
There is no sound.
mCheck that the player is connected
securely.
mThe audio connecting cable is
damaged. Replace it with a new
one.
mMake sure you connect the player to
the audio input connectors on the
amplifier (page 50).
mMake sure you turn on the TV or the
amplifier.
mMake sure you select the
appropriate position on the
amplifier so that you can listen to
the sound from the player.
mThe player is in pause mode or in
Slow-motion Play mode. Press
·
to return to Continuous Play mode.
mThe player is in Search mode. Press
· to return to Continuous Play
mode.
mWhen you connect the player to an
amplifier with DIGITAL OUT, set
“DIGITAL OUT” in “INITIAL
SETUP” correctly (pages 51, 52).
mCheck that the headphones plug
connected to the headphones jack is
firmly connected to this player.
mCheck that the VOL dial is not set to
“0.”
Troubleshooting
If you experience any of the following
difficulties while using the player, use
this troubleshooting guide to help you
remedy the problem. Should any
problem persist, consult your nearest
Sony dealer.
The power does not turn on.
mIf the POWER indicator is not lit,
check that the AC power adapter is
connected securely. When using the
battery pack, check the battery
consumption.
mMake sure you use the supplied AC
power adapter. (Do not use any
other AC power adapter.)
mCheck that the HOLD switch is set
to off.
mDisconnect the AC power adapter
from this player and the wall outlet
for more than one minute. Then
reconnect the AC power adapter
and turn the power on again. If the
power still does not turn on,
disconnect the AC power adapter
and the battery pack and consult
your nearest Sony dealer.
“
C05 Lo dc In
C05 Lo dc In
C05 Lo dc In
C05 Lo dc In
C05 Lo dc In” appears in the
front panel display.
mWhen using the battery pack, the
AC power adapter is not connected
to the wall outlet but is connected to
the player. Disconnect the AC
power adapter from the player.
mCheck that the AC power adapter is
connected to the wall outlet, then
disconnect from this player and
connect again.