Maintaining your vac-then-steam – Shark VAC-THEN-STEAM MV2010WC User Manual
Page 9
12
TOLL FREE:
1-800-798-7398
13
www.SharkVacThenSteam.com
English
Maintaining Your Vac-Then-Steam™
POST-MOTOR FILTER
1
Twist the Shark
®
logo knob on the
post-motor cover counter-clockwise
to release cover.
2
Use both hands to grip cover on both
sides and pull cover toward you.
Gently peel the filter off the inside of
the cover. Thoroughly rinse the filter
in lukewarm water. Squeeze out any
excess water. Air dry for 24 hours
before reusing.
3
Insert a dry filter into the inside of
the cover. Snap cover onto the
Vac-Then-Steam™.
Twist the Shark
®
logo knob clockwise
to secure cover.
CARE OF YOUR DUST CUP FILTERS
1
Turn
OFF “O” and then unplug the
vacuum. Pull out the dust cup. See
page 7 for instructions.
Lift the filter frame out from the top
of the dust cup. Remove the two
filter layers from the filter frame.
2
Thoroughly rinse the two filters in
lukewarm water. Squeeze out any
excess water. Air dry for 24 hours
before reusing.
3
Insert a dry filter set into the filter
frame. The order of the filters
impacts your dust cup performance.
Make sure the thick filter is on the
bottom and the thin filter is on top.
Put the frame with the filter set back
into the top of the dust cup.
RECOMMENDED MAINTENANCE
SCHEDULE: Using only water,
thoroughly rinse filters every 3
months and dry for 24 hours.
Replace filter set in the
Vac-Then-
Steam™ once a year. More regular
filter care or replacement may be
required with excessive use.
NOTE: Using only water, thoroughly
rinse filter every 3 months and dry
for 24 hours. Replace filter in the
Vac-then-Steam™ once a year. More
regular filter care or replacement
may be required with excessive use.
DO NOT use a hair dryer or any other
forced hot air to dry any of the filters.
NOTE: Any other servicing should be
performed by an authorized service
representative
ORDERING REPLACEMENT PARTS
Go to
www.SharkVacThenSteam.com
to find replacement filters,
accessories, and microfiber pads.
2
3
2
1
1
3
24
Thin Filter
Thick Filter
A replacement post-motor
filter has been provided
with your product. Use the
replacement filter while the
other is drying.
Replacement filter sets have
been provided with your
product. Use one of the
replacement filter sets when
another set is drying.
MV2010WC_11_IB_ENG_100803.indd 12-13
04/08/10 9:38 AM