Shark VAC-THEN-STEAM MV2010WC - Manual (Page 6)

6 TOLL FREE: 1-800-798-7398 7 www.SharkVacThenSteam.com
English Vacuum Mode
STORAGE
1 Place your foot lightly on the top of
the base. Tilt cleaning unit into the
upright position.
2 Turn off the vacuum power button
and unplug the unit.
3 Wrap cord around cord holders and
secure plug. Store cleaning unit in an
upright position.
EMPTYING THE DUST CUP
1 Press the dust cup latch at the
bottom of the canister upward. Pull
the dust cup assembly out and down.
2 Twist dust cup cover counter-
clockwise to open.
3 Tap canister gently over trash
receptacle to empty.
NOTE: Over time debris may gather
in the conical filter of your
Vac-
Then-Steam™ and this may reduce
your vacuum’s performance. Clean
the filter often for optimal suction
performance.
4 Remove the filter frame from the
filter canister. Tap the filter canister
gently over trash receptacle to
empty the cone.
5 To reattach the dust cup cover, align
the indicators that are printed on the
rear of the dust cup and cover. Turn
the cover clockwise and make sure
the solid arrows are aligned before
reinserting the dust cup into the
vacuum.
6 To replace the dust cup in to the unit,
gently push the dust cup assembly
up and in. The dust cup will click
into place.
IMPORTANT:
Always carry
the
Vac-Then-
Steam™ by the
cleaning unit
collar; rather
than by the
handle.
1
1
6
2
3
4
2
3
5
MV2010WC_11_IB_ENG_100803.indd 6-7 04/08/10 9:38 AM