Shark VAC-THEN-STEAM MV2010WC - Manual (Page 7)

8 TOLL FREE: 1-800-798-7398 9 www.SharkVacThenSteam.com
English
3 Place the cleaning unit onto the
Steam Frame. THE UNIT MUST BE
UPRIGHT.
IMPORTANT: Steam frame and pad
must be attached to the cleaning unit
in order to use the steam function.
NOTE: If you live in a hard water
area, we recommend using distilled
water in your
Vac-Then-Steam™.
Steam Mode
ASSEMBLY
1 Attach a steam pad onto the bottom
of the steam frame, matching the
hook and loop fasteners.
2 Place the steam frame/pad assembly
on the floor with the magnetic
connections facing up.
FILLING THE WATER TANK
1 Keep the cleaning unit in the upright
position to add water. Turn the water
tank cap counter-clockwise and
remove from the tank.
2 Use the filling flask and pour water
into the tank. Do not overfill. Replace
the cap on the water tank by turning
cap clockwise and tightening.
2
1
1
3
2
Do not use chemicals or
detergents in your
Vac-Then-Steam™. You
only need water to achieve
super-heated, sanitizing
steam.
MAGNETIC
CONNECTIONS
MV2010WC_11_IB_ENG_100803.indd 8-9 04/08/10 9:38 AM