Shark VAC-THEN-STEAM MV2010WC - Manual (Page 8)

10 TOLL FREE: 1-800-798-7398 11 www.SharkVacThenSteam.com
English Steam Mode
STORAGE
1 Unplug and turn the unit OFF “O”.
Press your foot on the steam frame.
Separate steam pad from steam
frame.
2 Remove the water tank cap and
empty water tank.
3 Wrap cord securely around cord
management hooks.
4 Store your Vac-Then-Steam™ in the
storage tray.
CAUTION: Use caution when
handling the steam frame. Magnetic
connections on the frame retain heat.
STEAM CLEANING
1 Plug in the cleaning unit. Slide
the toggle switch to expose the
steam power button.
2 Press the steam power button to the
ON “I” position. The illuminated red
light indicates that the “boiler” is on.
Wait 30 seconds for the water to
heat up and for steam to be ready.
3 Place your foot lightly on the top of
the base. TILT HANDLE BACK TO
ACTIVATE STEAM PUMP.
4 Push handle upright to stop steam.
NOTE: Check water level and fill
anytime throughout the cleaning
process to maintain optimal steam.
2
3
1
1
2
3
2
1
CARE OF YOUR MICRO-FIBER
CLEANING PAD
1 Wash pads in warm water. Wash
separately from other laundry. Only
use liquid detergent (no powder
detergent). Do not use fabric
softeners. Line dry or dry on a low
dryer setting.
2 If there are loose threads on the
pad carefully cut the threads with
scissors. Do not pull on them or cut
at the base.
MV2010WC_11_IB_ENG_100803.indd 10-11 04/08/10 9:38 AM