Samsung SIR-T150 - Manual (Page 17)

CHAPTER THREE
Operation
Adding and Deleting Channels
To add channels that were not memorized (or to delete unwanted channels from the
memory):
1 Enter the digits of the channel to be added or deleted.
2 Press the MENU button on the remote control.
Push the I-point control up or down to highlight the Channel icon
and press ENTER.
3 Push the I-point control up or
down to highlight Add/Delete
Channels and press ENTER.
4 Repeatedly pressing ENTER will
alternate between Add channel
(Message: “the channel is in
memory”), and Delete channel
(Message: “The channel is not in
memory.”)
Press the number buttons (or CH ▲▼ buttons) to switch to
the appropriate channel, and then repeat step 4. Press EXIT.
3 3
3.2