Samsung C2095-9995 - Manual

Connecting the USB cable
➤ Before connecting the yepp to PC, make sure to install USB driver.
Location of Controls
2 1
YP-T5 Quick Guide
Recording Button
Play/Pause Button
Hold Switch
Loop Repeating Button
USB Cable
Connection Port
ENC Jack
Neck strap Hook
MENU, Navigation button/
Move to Track/Speed Search/
Volume Button Display
Earphone Jack
Battery Cover
Microphone
Connect a USB cable to the USB port on the
computer.
Connect the other end of a USB cable to the USB
cable connection port on the bottom of the yepp,
and press the
button on the main unit.
● If you disconnect the USB cable from your PC while
implementing a command or initializing during USB
driver installation, your PC may not function correctly.
2
Upon installation of the USB driver
"SAMSUNG YP-T5" will appear in the
[Start] → [Settings] → [Control Panel] →
[System Properties] → [Device Manager].
4
1
USB driver is installed with a message saying that
it is searching for a new device. You may not see
the display screen during installation.
Go to the device manager to check that
installation has been successfully completed.
3
USB connect cable
Turning Power On and Off Playing Music
Pausing Music
● Power On : Press the button to turn on the power.
● Power Off : Press and hold the button to turn off the power.
Press the button.
● Playback starts.
Press the button to pause playback.
● If no buttons are pressed within 10 seconds(changes depending on settings),
the yepp automatically powers off.
● While in Pause mode, briefly press again to resume playback.