Siemens OPTIPOINT 500 - Manual (Page 2)

The optiPoint 500 adapters are fully
encapsulated, slide-in modules which
can be installed and removed easily on
the underside of the basic, standard
and advance telephones. This enables
the terminals to be adapted quickly and
easily to accommodate specific
workplace and organisational changes.
optiPoint 500 phone adapter
The optiPoint 500 phone adapter
enables an additional optiPoint 500
telephone to be connected to the
system without the need for additional
cabling. The telephones can be reached
simultaneously via independent numbers.
optiPoint 500 ISDN adapter
The optiPoint 500 ISDN adapter
enables standard basic rate ISDN
terminals (e.g. PC with ISDN S0 card
or video card) to be connected.
optiPoint 500 acoustic adapter
The optiPoint 500 acoustic adapter
allows the following telephone
accessories to be connected:
• Active loud speaker and desk
microphone
• Headset
• Busy display/door opener
• Secondary bell/visual paging
optiPoint 500 analogue adapter
The optiPoint 500 analogue adapter
allows the connection of an additional
analogue terminal (e.g. group three
fax machine, PC with modem card,
cordless phone).
optiPoint 500 recorder adapter
Offers a connection for a recording
device for recording important calls,
plus an earphone interface for
monitoring of calls.
optiPoint 500 PNT-E ISDN adapter
The ISDN adapter box PNT-E (Private
Network Termination Evolution)
enables remote data terminals, PCs,
video equipment, group four fax and
ISDN telephones to be connected at
competitively low cost.
USB interface
The basic, standard and advance have
a built-in USB port that may be used
for CTI and data applications.
optiPoint 500 basic
• 12 feature keys with LEDs
• Open listening (monitor)
• USB interface
• 1 adapter bay
• Additional key module support
• 2 keys for setting ringer volume/pitch
and handset/speaker receive volume
• 3 dialogue keys for easy menu
navigation and selection
• 2 by 24 adjustable display
• Colours: arctic, manganese
Extra functionality is available through
the range of optiPoint 500 adapters
and USB port. For instance, you could
connect an additional optiPoint 500
phone, fax device or headset.
Additional keys can be added via
the 16 or 90 key modules.
optiPoint 500 standard
• 12 feature keys with LEDs
• Full duplex handsfree
• USB interface
• 1 adapter bay
• Additional key module support
• 2 keys for setting ringer volume/pitch
and handset/speaker receive volume
• 3 dialogue keys for easy menu
navigation and selection
• 2 by 24 adjustable display
• Colours: arctic, manganese
Offers the same functionality as the basic
model plus full duplex handsfree talking.
optiPoint 500 advance
• 19 feature keys with LEDs
• Full duplex handsfree
• Headset port
• USB interface
• 2 adapter bays
• Additional key module support
• 2 keys for setting ringer volume/pitch
and handset/speaker receive volume
• 3 dialogue keys for easy menu
navigation and selection
• 2 by 24 adjustable display with
background lighting
• Colours: arctic, manganese
Adapters
This is a top of the range feature phone
with 19 programmable keys, built-in
headset port, an option for two adapters
and a backlit display.
16 key module
The optiPoint 500 16 key module is an
add on device with 16 keys each with
an LED. It provides 32 additional
number/feature stores using the shift
key on the phone. Up to two modules
may be connected to the optiPoint 500
basic, standard or advance.
90 key module
The optiPoint 500 90 key module is an
add on device with 90 keys each with
an LED. It provides 180 additional
number/feature stores using the shift
key on the phone. A single module may
be connected to the optiPoint 500 basic,
standard or advance.
optiPoint 500 privacy module
The privacy module provides
protection against telephone tapping.
Also suitable for use on numerous
digital and analogue handsets.