Sony DHC-MD5 - Manual (Page 7)

DHCMD5 3-858-048-11 (1)EN
7
Connecting optional
AV components and
outdoor aerials
Note on “VIDEO” and “GAME”
indications
Change the indications according to the component
connected to VIDEO/GAME IN.
•
When you connect a VCR, AM/FM tuner or tape
deck,
select “VIDEO”.
• When you connect a video game, multi disc
player or DAT deck, select “GAME”.
• When the sound is distorted selecting "VIDEO",
select “GAME”.
Connecting audio
components
Connecting a tape deck
Make sure to match the colour of the plugs
and the connectors.
Tip
When you connect the TC-TX5 stereo cassette deck
to the DHC-MD5, make sure to connect them each
other with the AU BUS terminals.
To enhance your system, you can connect
optional components. Refer to the
instructions of each component.
Connecting a video game/
VCR
Make sure to match the colour of the plugs
and the connectors.
To listen to the sound of VCR
Press FUNCTION repeatedly until “VIDEO”
appears.
To listen to the sound of a video
game
Press FUNCTION repeatedly until “GAME”
appears.
When “VIDEO” appears by pressing
FUNCTION, change the indication to
“GAME” following the procedure described
below.
1 Press FUNCTION repeatedly until
“VIDEO” appears.
2 Turn the power off, then press FUNCTION
and POWER simultaneously.
To retrieve “VIDEO,” start again from step
1.
To the audio output of a video game/VCR.
To the audio output
of a tape deck.
To the audio
input of a
tape deck. To the AU BUS
connector of the TC-TX5
stereo cassette deck
continued