Sony DHC-MD5 - Manual (Page 5)

DHCMD5 3-858-048-11 (1)EN
5
Step 2: Setting the
time
You must set the time beforehand to use the
timer function.
Set VOLTAGE SELECTOR to the
position of your local power line
voltage.
Connect the mains lead to a wall
outlet.
If the plug of this unit does not fit your
wall outlet, detach the supplied adapter
from the plug.
Inserting two R6 (size AA)
batteries into the remote
Tip
With normal use, the batteries should last for about
six months. When the remote no longer operates
the system, replace both batteries with new ones.
Note
If you do not use the remote for a long period of
time, remove the batteries to avoid possible damage
from battery leakage.
1
Press TIMER SET.
2
Turn MULTI JOG and set the hour.
3
Press ENTER/YES.
4
Turn MULTI JOG and set the
minute.
5
Press ENTER/YES.
The clock starts working.
To change the preset time
1 Press TIMER SET.
2 Turn MULTI JOG until “CLOCK SET?”
appears, then press ENTER/YES.
3 Repeat steps 2 to 5.
® ∏ · π §
º ‚
2,4 3,5 1
3
4
110-120V 220-240V
VOLTAGE SELECTOR
]
]
} }