Sony Ericsson P910a - Manual (Page 56)

56 Phone
Preliminary Layla850 P1B
• Access tab:
– Name – Enter a name for the calling card account.
– Access number – Enter the phone number of the calling
card server.
– Verification code – Enter the verification code.
– International prefix – Enter the international prefix used by
the server.
• Set up tab:
– Sending order – Number then code means that the P910a,
after you have connected to the server, first sends the
phone number you have entered, and then sends the
verification number.
Code then number means the opposite
order.
– Delay for number/code – Set a time delay between the
moment the calling card answers the call and the P910a
starts sending tones.
Some international calling card services instruct their users to
select a language by pressing a digit. When using the P910a
calling card feature, you can insert such a digit in one of these
places:
• Immediately after the access number, but preceded by a
pause sign, p .
• In the verification code.
• In the phone number that you dial.
Corporate phone services
You set up corporate phone services by importing a .pbx type
settings file from your corporate IT-manager. This file can be
received via email, stored on the Memory Stick or downloaded
from Internet.
Note Make sure the file is authentic before you import it.
To set up corporate phone services
1. Place the file in the Document > Unfiled folder of the P910a or
the Memory Stick.
2. Select Edit > Preferences > Calling cards and enter your device
lock code.
3. Tap Import .
4. Select the settings pbx file and tap Import .
5. Select the card among the imported cards in the Selected card
control.
6. Activate the card by setting the Calling Card Mode to either
Always use calling card or Prompt before call .
Incoming call behaviour
When you answer a call when the flip is open the default
behaviour is for the P910a to switch to the phone program.
Select the check box if you prefer to stay in the ongoing
program when you answer a call with the flip open.