Sony Ericsson P910a - Manual (Page 133)

Connecting to other devices 133
Preliminary Layla850 P1B
Connecting to other devices
Your P910a can be connected to other devices with similar
interfaces such as PCs, other P910as and handheld computers.
The connection can be made via:
• Bluetooth wireless technology (not together with
Windows 98)
• Cable
• Infrared (IrDA)
Note Bluetooth wireless technology and infrared transmitting
are rather power consuming. Do not have them on more than
necessary.
Depending on the type of connection you have chosen, you can
use your P910a to perform various tasks, for example:
• Sending and receiving files via infrared or Bluetooth wireless
technology – ‘beaming’.
• Making Backup/Restore and Synchronization of your data
and file transfer (cable, infrared and Bluetooth wireless
technology).
You can even use your P910a as a modem for Dial-Up
Networking using cable, infrared and Bluetooth wireless
technology. With Bluetooth wireless technology, you can for
example, connect a cordless headset.
PC connectivity software
Your P910a is delivered with a CD, Sony Ericsson PC Suite . This
software must be installed in the PC you want to connect to. See
‘Installing applications’ on page 130 for more information. You
do not need to install the
Sony Ericsson PC Suite if you only want
to perform beaming with the PC or use a cordless headset.
Connection via SyncStation
Connect the SyncStation to your PC with the USB cable. A
wizard helps you to install the USB cable the first time. The
Sony Ericsson PC Suite CD contains the necessary software.
Put your P910a in the SyncStation. A new wizard starts which
helps you to connect your P910a if this is the first time.
appears in the status area to the right on the taskbar when
the P910a is connected.
When connecting via cable, the P910a can be set in PC Connect
mode or Modem mode. The setting is made in
Control panel >
Connections > Cable , see ‘Cable’ on page 152.
Set the P910a in PC connect mode for
• Synchronization.
• Installation of software.