Standard Horizon MATRIX GX1280S - Manual (Page 52)

GX1280S Page 52
8.7 CHANNEL NAMING
This selection allows you to customize the name of a channel from the de-
fault name.
1. Press and hold down the [CALL/SET] key until
“RADIO SETUP” menu appear.
2. Press the [CALL/SET] key, then select “CH NAME”
in the “RADIO SETUP” menu with the CHANNEL
selector knob.
3. Press the [CALL/SET] key.
4. Turn the CHANNEL selector knob to select the
channel to be named and press the [CALL/SET]
key.
5. Turn the CHANNEL selector knob scroll through
the alphabet and 0 - 9.
6. Press the [CALL/SET] key to enter the desired
letter and move the cursor one space to the right.
7. Repeat procedure until the name is complete. The
name can consist of up to twelve characters. If
you do not use all twelve character, press the
[CALL/SET] key to move to the next space. To
clear the previous letter, press the [H/L] key.
8. Press and hold down the [CALL/SET] key to enter the name and exit
from the “CH NAME” menu. The LCD will return to the “SETUP” menu.
9. If you want to enter the name of another channel, repeat steps 3 through
8.
10. To exit this menu and return to radio operation mode press the [16/9]
key.