Standard Horizon MATRIX GX1280S - Manual (Page 37)

GX1280S Page 37
8. Repeat step 6 and 7 until the name is complete.
The name can consist of up to eleven characters,
if you do not use all eleven characters press the
[CALL/SET] key to move to the next space. This
method can also be used to enter a blank space in the name. To clear
the previous letter, press the [H/L] key.
9. After the eleventh letter or space has been entered, press the [CALL/
SET] key to advance to the MMSI (Maritime Mobile Service Identity Num-
ber) number entry.
10. Turn the CHANNEL selector knob to scroll through numbers, 0-9. To
enter the desired number and move one space to
the right press the [CALL/SET] key. Repeat this
procedure until all nine space of the MMSI num-
ber are entered.
11. If a mistake was made entering in the name or the MMSI number repeat
pressing the [CALL/SET] key until the wrong character is selected, then
move the channel knob to correct the entry.
12. To store the data entered, press and hold the [CALL/SET] key.
13. To enter another individual address, repeat steps 4 through 13.
14. To exit this menu and return to radio operation mode press the [16/9] key.
NOTE
Selecting “NEXT” or “EXIT” will automatically save the name and MMSI
number into memory.
7.7.2 Setting up Individual Reply
Allows setting up the radio to automatically (default setting) or manually
respond to a DSC Individual call requesting you to switch to a working chan-
nel for voice communications. When Manual is selected the MMSI of the
calling vessel is shown allowing you to see who is calling. This function is
similar to caller id on a cellular phone.
1. Press and hold down the [CALL/SET] key until
“RADIO SETUP” menu appears.
2. Turn the CHANNEL selector knob to select “DSC
SETUP” menu.
3. Press the [CALL/SET] key, then select “INDIV
REPLY” with the CHANNEL selector knob.
4. Press the [CALL/SET] key.