Snom VoIP PABX - Manual (Page 17)

1
Phone Usage
The following sections give information about how to perform certain
common operations on selected popular handsets.
If the information about a specific feature or phone is not shown here,
please consult the manufacturers documentation.
snom300
Placing a Call
There are 3 ways to place a call:
1 Completely Handsfree - Dial the number and press .
2 Handsfree Dialling - Dial the number and pick up the handset.
3 Handset dialling - Pick up, dial the number and press .
In handsfree mode, the handset may be picked-up at any time.
Answering a Call
1 Handsfree - Press .
2 Handset - Pick up the handset.
3 Headset - If the phone is configured for a headset, press
Answering multiple calls
Place the current call on hold by pressing the current line-button
(solidly lit L1 or L2 button). The phone will start ringing. Press
to
answer this call.
Switch between calls by pressing the line button of the caller you
wish to speak to. If there are 3 or more calls, put the current call on
hold, and use the left/right buttons on the silver keypad to select the
desired line, then press

Press “X” to hang-up the current call rather than replacing the
handset, or you may inadvertently cause a call transfer.
Transferring a Call
Unattended
: Press “transfer”, dial the destination number, and press
. You are no-longer part of the call.
Attended : Place the received call on hold by pressing the line button
for that call. Dial the destination number, and press “OK”. Speak with
the callee when answered. If only 2 lines are active, simply hang-up.
If more callers are present, you need to choose the line to transfer;
Press “Transfer” use left/right arrows to display line to transfer, then
press
.