beautypg.com

Reproducción, Playback – Samsung VP-D34(i) User Manual

Page 70

background image

ENGLISH

ESPAÑOL

Reproducción

70

70

Playback

Connecting to a TV which has no Audio and Video input jacks

You can connect your camcorder to a TV through a VCR.

1. Connect the camcorder and VCR with

the Multi-AV cable.

The yellow plug : Video

The white plug : Audio(L) - Mono

The red plug : Audio(R)

2. Connect a TV to the VCR.
3. Set the power switch on the camcorder to

PLAYER mode.

4. Turn on both the TV and VCR.

Set the input selector on the VCR to LINE.

Select the channel reserved for your VCR on the TV set.

5. Play the tape back.

Playback

You can play the recorded tape in PLAYER
mode.

1. Connect a power source and set the power

switch to PLAYER mode.

2. Insert the tape you wish to play back.
3. Using the

(FF) and

(REW) buttons,

find the first position you wish to play back.

4. Press the

(PLAY/STILL) button.

The images you recorded will appear on
the TV after a few seconds.

If a tape reaches its end while being played back, the tape will
rewind automatically.

Note

The playback mode (SP/LP) is selected automatically.

ANTENNA

S-VIDEO

A/V OUT

TV

VCR

CAMCORDER

VIDEO

AUDIO(L)

AUDIO(R)

Conexión a un televisor que no dispone de conectores
de Audio/Vídeo

Es posible conectar la videocámara a un televisor a través
de un videograbador.

1. Conecte la videocámara al videograbador

mediante el cable múltiple de Audio/Vídeo.

La clavija amarilla es la de vídeo.

La clavija blanca es la de audio(L)
- Mono.

La clavija roja es la de audio(R)

2. Conecte el televisor al videograbador.
3. Ajuste el interruptor de la videocámara

en la modalidad PLAYER.

4. Encienda el televisor y el videograbador.

Ajuste el selector de entrada del videograbador en LINE.

Seleccione el canal reservado para el videograbador en el
televisor.

5. Reproduzca la cinta.

Reproducción

Puede reproducir la cinta grabada en la
modalidad PLAYER.

1. Conecte la videocámara a una fuente de

energía y ajuste el interruptor en la posición
PLAYER.

2. Introduzca la cinta que desee ver.
3. Busque el comienzo de la secuencia que

desea ver mediante los botones

(FF)

y (REW).

4. Pulse el botón

(PLAY/STILL).

Pasados unos segundos, las imágenes grabadas aparecerán en
el televisor.

Si la cinta llega al final mientras está en la modalidad de
reproducción, se rebobinará automáticamente.

Nota

La modalidad de reproducción (SP/LP) se selecciona de manera
automática.

00654G VP-D30-UK+ESP(60~106) 5/12/03 6:02 PM Page 70

This manual is related to the following products: