Sharp PG-A10S - Manual (Page 47)

43
Easy to Use Functions
Keylock Function
Locking the Operation
Buttons
Hold down on the projector for
about 3 seconds while the projector is
being turned on.
Note
• The keylock function does not affect the opera-
tion with the remote control buttons.
• You cannot use the keylock function while the
projector is warming up.
Use this function to lock the operation buttons on the projector.
Taking the Keylock off
Hold down on the projector for
about 3 seconds while the projector is
being turned on.
• You can take the keylock off by holding down
on the projector for about 3 seconds while the pro-
jector is in standby mode.
Power ON button
A10X_A10S#E_Print#p40_50.p65 03.2.4, 2:06 PM 43