Picture adjustment, Clr temp, Adjusting the image – Sharp PG-A10S User Manual

Page 40

You can adjust the projector’s picture to your preferences using the “Picture” menu. For
operation of the menu screen, see pages 32 to 35.

CLR Temp

(Adjusting the

Color Temperature)

Select “CLR Temp” on the “Picture” menu
and the desired color temperature setting.

Description of Color Temperature Settings

Adjusting the Image

Select the item on the “Picture” menu and
adjust the image.

Description of Adjustment Items

Note

• “Color”, “Tint” and “Sharp” are not displayed

when selecting INPUT 1 and setting the “Sig-
nal Type” to “RGB”.

• “Sharp” can be adjusted when 480

, 480P, 540P,

580

, 580P, 720P, 1035

or 1080

signals are

detected while “Signal Type” for INPUT 1 is set
to “Component”.

• To reset all adjustment items, select “Reset” and

press

Picture Adjustment

Selectable settings

5500K
6500K
7500K
8500K
9300K

10500K

Description

For lower color temperature for warmer,
reddish incandescent-like images.

For higher color temperature for cooler, blu-
ish, fluorescent-like images.

Selectable items

Press

Contrast
Bright
Color
Tint
Sharp
Red
Blue

for less contrast.

for less brightness.

for less color intensity.

for making skin tones purplish.

for less sharpness.

for weaker red.

for weaker blue.

for more contrast.

for more brightness.

for more color intensity.

for making skin tones greenish.

for more sharpness.

for stronger red.

for stronger blue.

Example: “Picture” screen menu for

INPUT 1 (RGB) mode

Note

• Values for “CLR Temp” are only approximations.

A10X_A10S#E_Print#p32_39.p65

03.2.4, 2:05 PM