Sharp T FOUND AR-M208 - Manual (Page 78)

MISFEED REMOVAL
76
COP
IE
R
TROUBLE
?
Misfeed in the copier
Check the misfeed location. Remove the misfed paper following the
instructions for each location in the illustration below.
A. Misfeed in the paper feed area
1 Open the bypass tray and the side cover.
2 Gently open the front cover.
If the misfed paper is seen from this
side, proceed to “C. Misfeed in the
transport area”.
If paper is misfed here, proceed to
“A. Misfeed in the paper feed area”.
If paper is misfed here,
proceed to “B. Misfeed
in the fusing area”.
Ar-M208_sec.book 76 ページ ２００２年６月１３日 木曜日 午後２時３７分