Sharp T FOUND AR-M208 - Manual (Page 110)

FINISHER (AR-FN5 N)
108
OP
T
IO
N
AL E
Q
UIP
M
E
N
T
4 Insert the new staple cartridge into the box until it clicks into place.
● Insert the new cartridge by aligning the arrows on the cartridge with those on the box.
Check that the cartridge locks in place by pulling it slightly.
● A cartridge holds 3,000 staples.
5 Remove the tape from the cartridge.
6 Insert the staple box into the stapler unit until it clicks into place.
7 Close the stapler cover.
Staple jam removal
If staples become jammed in the stapler, the message "Check stapler or staple jam." will appear.
Remove the jammed staples in the manner described below.
1 Open the stapler cover.
Ar-M208_sec.book 108 ページ ２００２年６月１３日 木曜日 午後２時３７分