Samsung SIR-TS360 User Manual

Page 35

CHAPTER 3

Setting up and connecting

If you connected your TV using RGB/DVI or YP

output, press the output mode button to

select RGB/DVI or YP

output mode.

(Optional) follow the instructions on the next page if you have a VCR and
want to hook up the VCR control.

Plug in the power cords for your TV, A/V receiver, and DIRECTV

HD Receiver.

Setting your TV input button

To view any of the programming from your DIRECTV

HD Receiver (satellite, cable, or

off-air), set your TV to display the input from the video input jack you used to connect the
DIRECTV

HD Receiver. (This is a setting on your TV usually controlled by a Video, Input,

or Mode button. See your TV manual for help.)
Also, if necessary, set your A/V receiver to play the audio from the audio input jack you
used to make the audio connection. See your A/V receiver manual for help.

Connecting the RF remote cable with RF receiver.

You can operate the Digital Satellite Receiver when installed in a cabinet or from another
room in your house using the RF remote control. (Optional)

Connect the RF Receiver to the RF REMOTE jack of the Digital Satellite Receiver.

NOTE

The operating range of the remote control is about 100 feet when connecting the RF receiver.
This may decrease due to ambient reception conditions, weak batteries, obstacle, etc...

SIR-TS360-CHAPTER 3 11/18/03 9:42 AM Page 35