Samsung M60 - Manual (Page 27)

6
Caution
Wireless devices are not user serviceable. Do not
modify them in any way.
Modification to a wireless device will void the
authorization to use it. Contact manufacturer for
service.
Caution
FCC Statement for Wireless LAN use:
“While installing and operating this transmitter and
antenna combination the radio frequency exposure
limit of 1mW/cm2 may be exceeded at distances
close to the antenna installed. Therefore, the user
must maintain a minimum distance of 0cm from
the antenna at all times.
This device can not be colocated with another
transmitter and transmitting antenna.” (This
Statement is not applicable to UMPC(Ultra Mobile
PC) such as PDA, Portable PC.)
FCC Part 68
(If fitted with a modem device.)
This equipment compiles with part of the FCC rules.
On the back of this equipment is a label that contains,
among other information, the FCC registration number
and ringer equivalence number (REN) for this equipment.
If requested, this information must be provided to the
telephone company.
This equipment uses the following USOC jacks : RJ11C
An FCC compliant telephone cord and modular plug is
provided with this equipment. This equipment is designed
to be connected to the telephone network or promises
wiring using a compatible modular jack which is Part 68
compliant. See Installation Instructions for details.
The REN is used to determine the quantity of devices
which may be connected to telephone line. Excessive
RENs on the telephone line may result in the devices
not ringing in response to an incoming call. In most, but
not all areas, the sum of RENs should not exceed five
(5.0). To be certain of the number of devices that may be
connected to a line, as determined by total RENs, contact
the local telephone company to determine the maximum
REN for the calling area.
If the terminal equipment causes harm to the telephone
network, the Telephone Company will notify you in
advance that temporary discontinuance of service may
be required. But if advance notice is not practical, the
telephone company will notify the customer as soon as
possible. Also, you will be advised of your right to file a
complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its
facilities, equipment, operations, or procedures that could
affect the operation of the equipment. If this happens,
the telephone company will provide advanced notice in
order for you to make necessary modifications to maintain
uninterrupted service.
If trouble is experienced with this equipment (Modem)
for repair or warranty information, please contact your
local distributor. If the equipment is causing harm to the
telephone network, the telephone company may request
that you disconnect the equipment until the problem is
resolved.
The user must use the accessories and cables supplied
by the manufacturer to get optimum performance from the
product.
No repairs may be done by the customer.